Zte Unite II User Manual page 22

AP Isolation: Enable or disable this function. If Enable is selected, the wireless devices connected to

your device will be unable to communicate with each other.
Security Mode: The security modes are described below:

Mode
OPEN
WPA2(AES)-PSK
WPA-PSK/WPA2-PSK Apply both the WPA-PSK and WPA2-PSK scheme.
Wi-Fi Password: Enter the password manually.

LTE Max Station Number: Choose the maximum number of the stations which connect

to the 4G LTE™ network simultaneously.
CDMA Max Station Number: Choose the maximum number of the stations which

connect to the CDMA network simultaneously.
Click Apply to confirm your configuration.
Advanced Settings
Select Settings > Wi-Fi Settings > Advanced Settings, the parameters are shown in the following figure:
Band Selection: Select a band from the drop-down list.

Network Mode: If all of the wireless devices connect with this device in the same transmission

mode, the performance will be improved when you choose the appropriate wireless mode.
Channel Bandwidth: Select a channel bandwidth from the drop-down list.

Country/Region Code: Select the right country code. When using the device internationally,

please change the country/region code.
18 Confidential and Proprietary Information of ZTE CORPORATION
Description
You can authenticate successfully with a SSID, whether it is valid or empty.
It is the securer version of WPA with implementation of the 802.11i standard.
TM
ZTE Unite II User Manual