Using The Wps(Optional) - Zte MF970 User Manual

3. Wait until the computer is connected to your device
successfully.

Using the WPS(Optional)

If your client device supports WPS, you don't have to input the
password manually after WPS has been available. Please do
the following steps:
1. Power on your device, and enable the Wi-Fi function on your
device.
2. Enable WPS function. Please press the FUNC Key.
3. Select WPS to start Wi-Fi Protected Setup authentication
process.
4. Enable the WPS function on your client to respond this
authentication process.
5. Follow the system prompts on your client to finish the
connection.
NOTES:
 The device will wait for receiving the access request of
wireless access client within 2 minutes.
 For the detailed operations about the client, please refer to
the client's instruction.
9