Table of Contents
Advertisement
If you select Enable, set the DMZ IP Address, and then click Apply to confirm your configuration.
Router Settings
Select Settings > Router settings the router information is shown in the following figure:
IP Address: IP address for LAN interface.
Subnet Mask: Subnet mask for the IP address.
DHCP Server: Enable or disable DHCP Server function.
DHCP IP Pool: Allocate begin and end IP address for IP pool.
DHCP Lease Time: Define how long the leased IP address will be expired, and will relocate
new IP address.
Click Apply to confirm your configuration.
WPS Function
Your router supports WPS function. You can use this function to connect the client to your
router.
1.
Power on your router, and enable the Wi-Fi function on your router.
2.
Enable the WPS function. Please check the WPS Setting on the homepage.
3.
Press the WPS button on your router to start Wi-Fi Protected Setup authentication process.
4.
Enable the WPS function on your client to respond to this authentication process.
5.
Follow the system prompts on your client to finish the connection.
20 Confidential and Proprietary Information of ZTE CORPORATION
Advertisement
Table of Contents
