Turning The Appliance On; Turning The Appliance Off; Changing The Menu Settings; Setting The Language - DeLonghi Perfecta ESAM5600 User Manual

NB! When using the appliance for the first
time, you need to make 4/5 cups of coffee and 4/5
cappuccinos before it starts to give satisfactory
results.
TURNING THE APPLIANCE
ON
NB! Before turning the appliance on, make
sure the main switch on the back of the appliance
is in the I position (fig. 1).
Each time the appliance is turned on, it performs
an automatic preheat and rinse cycle which can-
not be interrupted.
A drop animation indicates that rinsing is under-
way (see section "Meaning of animations").
The appliance is ready for use only after comple-
tion of this cycle.
Danger of burns! During rinsing, a little
hot water comes out of the coffee spouts and is
collected in the drip tray underneath.
Avoid contact with splashes of water.
• To turn the appliance on, press the button on
the right of the touch screen
appliance begins the heating cycle indicated
by a thermometer icon (fig. 7) which fills as
the cycle advances.
Once heating is complete, the appliance shows
the time set and the coffee taste and quantity
selection bars set to the standard values ("stan-
dard" quantity and taste).
The machine is now ready for use.
TURNING THE APPLIANCE
OFF
Each time the appliance is turned off, it performs
an automatic rinse cycle which cannot be inter-
rupted.
Danger of burns! During rinsing, a little hot
water flows from the coffee spouts. Avoid contact
with splashes of water.
To turn the appliance off, press the
(fig. 5). The appliance performs the rinse cycle
then goes off.
NB! If the appliance is not used for a long
period, place the main switch on the back of the
appliance in the 0 position (fig. 6).
CHANGING THE MENU
SETTINGS
The programming menu is divided into 3 sections
indicated by different icons. Each section is divi-
ded into groups as described below:
SETTINGS
MAINTENANCE
CLOCK
(fig. 5). The
To access the required section, press the P icon
and use the selection icons (C4 and C10) to scroll
until the image you want is displayed. Then press
the
to exit).
menu and you want to exit, press the P icon a
number of times.
To modify the language on the display, proceed as
follows:
1. Choose the "SETTINGS" section as described
2. Press the selection icons < or > until "LAN-
3. Press the
4. Press the selection icons < or > until the
button
5. Press the
6. The appliance is automatically ready for use
11
icon to confirm (or press the P icon again
NB! When navigating in the programming

Setting the language

above;
GUAGE" is displayed;
icon to confirm;
required language is displayed;
icon to confirm (or the P icon
to cancel the operation).
again.
• Language
• Coffee temperature
• Water hardness
• Display contrast
• Beep
• Default values
• Descaling
• Statistics
• Adjust time
• Auto-start
• Auto-off