Kyocera Hydro Vibe User Manual page 171

Use Face Unlock
1. Touch > > Settings
2. Touch Face Unlock.
3. Read a message and touch Set it up.
4. Find an indoor location not too bright and not too dark, and then touch Continue.
5. Using the front-facing camera, adjust the phone so that your face fits in the area outlined with dots
on the screen.
6. The message "Face captured." appears when the Face Unlock set up was successful.
7. Touch Continue and create a security pattern or PIN. You will be prompted to set up a backup
lock. Select Pattern or PIN and set it up.
8. Touch OK to save the setting.
To unlock, turn on the phone and look at the front-facing camera so that it recognizes you. If
l
it fails to recognize you, a backup lock screen appears. Enter a pattern or PIN to unlock.
Use a Screen Unlock Pattern
1. Touch
> > Settings
2. Touch Pattern.
3. Draw the screen unlock pattern by connecting at least four dots in a vertical, horizontal, or
diagonal direction. Lift your finger from the screen when finished.
4. The phone records the pattern. Touch Continue.
5. When prompted, draw the screen unlock pattern again, and then touch Confirm.
6. Enter a backup PIN, touch Continue, re-enter the PIN, and touch OK to save your screen unlock
pattern.
Note: Clear the Make pattern visible check box if you do not want the unlock pattern to display on
the screen when you unlock it.
Note: To change your unlock screen pattern, touch
lock.
Settings
> Lock screen > Screen lock.
> Lock screen > Screen lock.
> > Settings > Lock screen > Screen
161