Kyocera Hydro Vibe User Manual page 115

Note: Using both 4G LTE service and hotspot drain your phone's battery at a much faster rate than
when using any other feature combination. The best way to keep using the phone as a hotspot is to
have it connected to a power supply.
Important: Write down the passkey (password) for this communication (shown onscreen).
Connect to Portable Wi-Fi Hotspot
1. Enable Wi-Fi (wireless) functionality on your target device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the device and select your phone hotspot from the network list.
The name for your phone hotspot can be changed by touching
l
hotspot
3. Select this device and follow your onscreen instructions to enter the passkey (provided on the
Portable Wi-Fi hotspot page).
4. Launch your Web browser to confirm you have an Internet connection.
Configure Portable Wi-Fi Hotspot
1. Touch > > Portable Wi-Fi hotspot
– or –
Touch > > Settings
2. Set the following options:
Network SSID: Sets your network name.
l
SSID broadcast: Selects the check box to broadcast the SSID.
l
Security: Sets the security level.
l
Password: Sets a password if necessary.
l
Maximum Wi-Fi clients: Sets the maximum Wi-Fi clients that can connect to your phone.
l
Auto off: Sets the length of time to elapse when your hotspot feature is disabled if there is no
l
device connected.
Channel: Selects the channel you want to use.
l
Touch > Advanced: Sets the advanced settings, such as local router IP settings or DHCP
l
server settings.
Web and Data
> Network SSID.
> More... > Tethering & portable hotspot > Set up Wi-Fi hotspot.
.
> > Portable Wi-Fi
105