Reconnect A Headset Or Car Kit; Disconnect Or Unpair From A Bluetooth Device - Kyocera Hydro Vibe User Manual

The pairing and connection status is displayed below the hands-free headset or car kit name in the
Bluetooth devices section. When the Bluetooth headset or car kit is connected to your phone, the
Bluetooth paired icon
you have connected, you can then start using the headset or car kit to listen to music or make and
receive phone calls.
Note: Due to different specifications and features of other Bluetooth-compatible devices, display
and operations may be different, and functions such as transfer or exchange may not be possible
with all Bluetooth-compatible devices.

Reconnect a Headset or Car Kit

When you have paired a headset with your phone, you should be able to reconnect it automatically
by turning on Bluetooth on your phone and then turning on the headset. However, sometimes you
will need to reconnect manually, for example if you have been using your headset with another
Bluetooth device.
1. Touch > > Settings
2. If Bluetooth is not switched on, touch the on/off slider to turn Bluetooth on.
3. Make sure that the headset is discoverable.
4. Touch the headset's name in the PAIRED DEVICES list.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in
from a Bluetooth Device, and then follow the instructions in
Kit.

Disconnect or Unpair from a Bluetooth Device

You can manually disconnect or unpair from a Bluetooth device through the Bluetooth settings menu.
Disconnect a Bluetooth Device
1. Touch > > Settings
2. In the Bluetooth devices section, touch the device name to disconnect.
3. Touch Disconnect.
Tools and Calendar
is displayed in the status bar. Depending on the type of headset or car kit
> Bluetooth.
> Bluetooth.
Disconnect or Unpair
Connect a Bluetooth Headset or Car
137