Mobile Networks; Network Mode - Kyocera Hydro Vibe User Manual

2. Bring your phone close to another NFC-enabled device, typically back to back aiming the NFC
antenna, and then touch your screen. The app determines what gets beamed.
Note: The NFC antenna is located on the lower half of the back cover of your phone. Use center of
the area to get best performance.

Mobile Networks

The Mobile networks options let you enable your phone's mobile data access, set your preferred
network mode, configure Connections Optimizer, and select network operators for international use.
Enable Mobile Data
1. Touch
> > Settings
2. Select the Data enabled check box.

Network Mode

1. Touch
> > Settings
2. Select LTE/CDMA or CDMA only. The phone will scan for the 4G LTE network and will
automatically connect to it.
When your phone is connected to the 4G network, the 4G icon (
Note: The 4G network is self-discoverable, which means no additional steps are required for your
phone to connect to it.
Settings
> More... > Mobile networks.
> More... > Mobile networks > Network mode.
) appears in the status bar.
150