Unmount The Microsd Card; Use The Phone's Microsd Card As A Usb Drive - Kyocera Hydro Vibe User Manual

1. Touch
> > Settings
2. Scroll down the screen, touch Erase SD card > Erase SD card.
3. Touch Erase everything to confirm the process.
Note: The formatting procedure erases all the data on the microSD card, after which the files
CANNOT be retrieved. To prevent the loss of important data, please check the contents before you
format the card.

Unmount the microSD Card

When you need to remove the microSD card, you must unmount the microSD card first to prevent
corrupting the data stored on it or damaging the microSD card. Since you will remove the battery first
before you can remove the microSD card, close all running applications on your phone and save any
data first.
1. Touch
> > Settings
2. Touch Unmount SD card > OK.
3. Remove the microSD card. See

Use the Phone's microSD Card as a USB Drive

To transfer music, pictures, and other files from your computer to your phone's microSD card, you
need to set the phone's microSD card as a USB drive. For more details about transferring content
between your phone and a computer, see
1. Connect the phone to your computer using the supplied USB cable.
2. When the PC connection screen appears, touch Mass Storage, and then touch Done > OK.
3. On your computer, the connected phone is recognized as a removable disk. Navigate to this
removable disk and open it.
4. Do one of the following:
Copy files from the computer to the root folder on the phone's storage card.
l
Copy files from the phone's storage card to a folder on your computer or computer desktop.
l
5. After copying the files, unmount the removable disk (that is, the connected phone) as required by
your computer's operating system to safely remove your phone, and do either of the following:
Disconnect the phone from the computer.
l
Tools and Calendar
> Storage.
> Storage.
Remove a microSD Card.
Transfer Files Between Your Phone and a Computer.
142