Seagate ST4000VX000 Product Manual page 9

www.seagate.com
Table 1 Drive specifications summary for 4TB and 3TB models (continued)
Drive Specification*
Wet bulb temperature (max)
Altitude, operating
Altitude, non-operating
(below mean sea level, max)
Operational Shock (max)
Non-Operational Shock (max)
Vibration, operating
Vibration, non-operating
Drive acoustics, sound power
Idle***
Seek
Non-recoverable read errors
Annualized Failure Rate (AFR)
Warranty
Load/Unload cycles (25°C, 50% rel. humidity)
Supports Hotplug operation per the
Serial ATA Revision 3.0 specification
*All specifications above are based on native configurations.
** One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary
depending on operating environment and formatting.
*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Seagate Surveillance HDD Product Manual, Rev. A
ST4000VX000
40.0°C max (nonoperating)
2Hz to 22Hz: 0.25 Gs, Limited displacement
To determine the warranty for a specific drive, use a web browser to access the
following web page: http://www.seagate.com/support/warranty-and-replacements/
From this page, click on "Check to see if the drive is under Warranty". Users will be
asked to provide the drive serial number, model number (or part number) and country of
purchase. The system will display the warranty information for the drive.
300,000 at 25°C, 50% rel. humidity
ST3000VX002
37.7°C max (operating)
–304m to 3048m
(–1000 ft to 10,000 ft)
–304m to12,192m
(–1000ft to 40,000+ ft)
80 Gs at 2ms
300 Gs at 2ms
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
2.3 bels (typical)
2.4 bels (max)
2.5 bels (typical)
2.6 bels (max)
14
1 per 10 bits read
<1%
Yes
Drive Specifications
5