Installing The Battery In The Handset; Battery Charge - Panasonic KX-TG2336C Operating Instructions Manual

Installing the Battery in the Handset

1
Insert the battery (
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as indicated
by the arrow. Replace the old battery with a new one
(p. 10). Close the cover and charge the battery for 6 hours.

Battery Charge

Place the handset on the base unit.
Charge for 6 hours before initial use.
Repeat charging will require
approximately the same amount of
charging time (6 hours) if the battery is
depleted completely.
• The unit beeps once, the CHARGE indicator
lights, and "Charging" is displayed.
• When the battery is fully charged, "Charge
completed" is displayed.
Battery strength
You can confirm battery strength
on the handset display.
Battery strength is indicated by
the icons shown in the chart to
the right.
), and press it down until it snaps into the compartment (
1
Display prompt
5
6
7
074 (flashing)
8
2
CHARGE
Indicator
Needs to be recharged.
Installation
2
).
OR
Battery strength
Fully charged
Medium
Low
Discharged
9