Intercom; Making Intercom Calls - Panasonic KX-TG2336C Operating Instructions Manual

Intercom

Intercom calls can be made between the handset and the base unit.

Making Intercom Calls

Handset
From
Press [HOLD/INTERCOM].
1
• The base unit will ring for 1 minute.
• To stop paging, press [OFF].
When the paged party answers, being
2
speaking.
• You can switch to the speaker by pressing [s]. To
switch back to the receiver, press [C].
To disconnect the intercom, press [OFF].
3
Base Unit
From
Using this feature, you can also locate a misplaced handset.
Press [LOCATOR/INTERCOM].
1
• The SP-PHONE indicator lights.
• The handset will ring for 1 minute.
• To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM].
When the paged party answers, speak into the MIC.
2
To disconnect the intercom, press [SP-PHONE] or
3
[LOCATOR/INTERCOM].
• The indicator light goes out.
During an intercom call:
• If you have difficulty hearing while using the handset speakerphone and base
unit speaker, decrease the speaker volume by pressing VOLUME [<] on the
base unit or [d] on the handset.
• If an incoming call is being received, you will hear two tones (incoming call
tone, page 52) and the IN USE indicator will flash rapidly on the base unit.
To answer the call;
— if using the handset, press [OFF], then [C] or [s].
— if using the base unit, press [SP-PHONE] twice.
38
Calling Base
Intercom
00-00-05
Mute
L