Table of Contents
Advertisement
PQQX14045ZA.book 9 ページ ２００４年２月１９日 木曜日 午後３時４７分
Installing the Battery in the Handset
1
Insert the battery (
), and press it down until it snaps into the compartment (
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as indicated
by the arrow. Replace the old battery with a new one
(p. 10). Close the cover and charge the battery for 6 hours.
Battery Charge
Place the handset on the base unit.
Charge for 6 hours before initial use.
Repeat charging will require
approximately the same amount of
charging time (6 hours) if the battery is
depleted completely.
• The unit beeps once, the CHARGE
indicator lights, and "Charging" is
displayed.
• When the battery is fully charged, "Charge
completed" is displayed.
Battery strength
You can confirm battery strength
on the handset display.
Battery strength is indicated by
the icons shown in the chart to
the right.
2
1
Display prompt
5
6
7
074 (flashing)
8
Installation
OR
CHARGE
Indicator
Battery strength
Fully charged
Medium
Low
Needs to be recharged.
Discharged
2
).
9
Advertisement
Table of Contents
