Uniden BLUETOOTH XDECT R035BT Owner's Manual page 8

Most cellular phones automatically transfer the audio to a
Bluetooth device as soon as it pairs; if yours does not, look in
x
your phone's Bluetooth setup for a "transfer audio" or "send
audio to device" option.
1. Pick up the handset from the cradle.
To test the connection
2. Dial the number you want to call, then press
handset. You may not hear a dial tone or ringing, but the handset
display says Talk.
3. Make sure the call connects and you can hear clearly. (When
you're finished, press
The XDECT R035BT remembers the pairing information for
your cellular; if it loses connection with your phone for any
x
reason (e.g., the cellular phone travels out of range, runs out of
charge, etc.), the XDECT R035BT can automatically reconnect
the next time your phone becomes available.
The XDECT R035BT can save the pairing information for two
Using the XDECT R035BT with two Bluetooth phones
different Bluetooth phones, but it can only use one cellular line at
x
any given time. For example, if you pair the XDECT R035BT to two
Bluetooth phones, when you press
R035BT asks which phone you want to connect to.
If you are using the XDECT R035BT to talk on one Bluetooth
phone, the XDECT R035BT will not ring if a call comes in on the
x
second phone.
You can set a different ring tone for each paired cellular phone
(see page 15).
x
To pair a second Bluetooth phone, just repeat the pairing
procedure with the second phone. (If the first phone interferes
x
when you're pairing the second, just turn off Bluetooth on the first
phone until you finish pairing the second one.)
4
to hang up.)
END
LINk
twice on the
LINk
on the handset, the XDECT