Using The Repeater; How It Works - Uniden BLUETOOTH XDECT R035BT Owner's Manual

Using the Repeater

An XDECT R003BT repeater can extend the range of your base in all

How it works

directions, including up and down. The XDECT R003BT repeater unit is
also a charger for the accessory handset.
Each handset will automatically connect to the repeater or the base,
depending on which signal is stronger, and the handset operates exactly
the same way whether it's connected to the base or to the repeater.
The repeaters must be registered to the base before you can use them.
Any repeaters that come packaged with the base are already registered
to that base. For instructions on registering repeaters to the base, see
page 37.
Handset
6
Base coverage area
(The base signal is
stronger; handsets
in this area connect
to the base.)
Base
10m
(Minimum
separation
distance)
(Handsets in this area can
connect to either unit.)
Repeater
Repeater coverage area
(The repeater signal is
stronger; handsets in
this area connect to
the repeater.)
Handset
Note: Base range (grey
area) and repeater range
(dotted outline around
repeater) is represented
here as circular. Actual
coverage area will
vary depending on
environment.
Your base supports a
total of six XDECT R003BT
repeaters, including
any that were supplied
with your phone.