Uniden BLUETOOTH XDECT R035BT Owner's Manual page 36

If...
The system won't record
messages.
A handset can't access
the answering system.
The XDECT R035BT
won't pair with my
phone.
The XDECT R035BT
doesn't ring when my
cellular phone does.
The XDECT R035BT
paired with my phone,
but I can't hear anything
through the handset.
32
Try...
Making sure the Record Time is not set to
-
Announce Only.
Deleting messages (memory may be full).
-
Making sure the call was on the land line
-
(the system cannot answer MobileLink
calls).
Seeing if another handset is using the
-
system.
Making sure the phone is in standby.
-
Making sure your phone is in pairing mode.
-
Check your phone's manual for instructions
-
on Bluetooth device pairing.
Making sure your phone supports the
-
Bluetooth handsfree profile.
Making sure your phone has Bluetooth
-
turned on.
Making sure your phone is in range of the
-
base.
Making sure the handset's ringer is not
-
turned off. (The base doesn't ring on cellular
calls.)
Adjusting the handset volume.
-
Setting your cellular phone to transfer
-
the audio to a Bluetooth device. Check
your phone's manual for instructions on
Bluetooth setup and options.
Erase the Bluetooth pairing and repair
-
the cellphone to the base. Press and hold
for 10 seconds. The base beeps
MoBILELINk
and the Bluetooth pairing information is
erased from the base (if 2 cellular phones
are paired, both pairings are deleted).