Central Machinery 93507 Assembly And Operating Instructions Manual page 21

(See Figure U.)
Turn the Coolant Pump Valve (159) to its "OPEN" position. Then, turn the Cool-
5.
ant Pump Toggle Switch (11) to its "ON" position. (See Figure U.)
Turn the Motor Toggle Switch (37) to its "ON" position. (See Figure U.)
6.
WARNING! Cut only flat workpieces when the Bandsaw is in its vertical
7.
position. Never attempt to cut pipes or other round objects with the Bandsaw in
its vertical position.
8. Before cutting, turn on the Bandsaw and check for excessively loose Saw Blade
(127) tension or machine vibration. If this is found, turn off the Bandsaw and
correct the problem before using. (See Figure U.)
9. Set the workpiece on the Large Vertical Cutting Plate (182), making sure to keep
downward pressure on the workpiece throughout the cutting process.
(See Figure U.)
MOTOR
TOGGLE
SWITCh
(37)
COOLANT PUMP
TOGGLE SWITCh
(11)
FIGURE U
For technical questions, please call 1-800-444-3353.
SKU 93507
LARGE VERTICAL CUTTING PLATE
(182)
hYDRAULIC CYLINDER
(20)
SAW BLADE
(127)
SAW hEAD ASSEMBLY
COOLANT PUMP
VALVE
(159)
POWER CORD PLUG
(38)
REV 10/06
Page 21