Anchor Watch Alarm - Furuno FAR-2107 Series Operator's Manual

5.

ANCHOR WATCH ALARM

The anchor watch alarm informs you when your boat is moving when it should be at
rest. When the anchor watch is active, a red dashed circle marks the anchor watch
area.
1. Left-click the MENU box.
2. Select 3 [ALARM] then push the left button.
[ALARM]
1 BACK
2 TARGET ALARM MODE
IN/OUT
3 TARGET ALARM LEVEL
1/2/3/4
4 WATCH ALARM
OFF/6M/10M/
12M/15M/20M
5 ALARM SOUND LEVEL
OFF/LOW/MID/HIGH
6 [ALARM OUT1]
7 [ALARM OUT2]
8 [ALARM OUT3]
9 [ALARM OUT4]
0 ANCHOR WATCH
OFF/ON
0.00NM
3. Select 0 ANCHOR WATCH ALARM then push the left button.
4. Select ON then push the left button.
5. Use the scrollwheel to set alarm radius, from 0.00 to 9.99 (nm). Spin the scroll-
wheel to set then push it to confirm.
6. Push the right button twice to close the menu.
When your ship moves a distance more than the anchor watch setting, the buzzer
sounds and the indication ANCHOR WATCH appears at the bottom right corner.
To disable the alarm, select OFF at step 4 then push the right button twice to close the
menu.
Setting
range
31
Own ship
position
: Alarm area