Processor Option - HP ProLiant BL495c G6 User Manual

Install the DIMM.
7.
Install the DIMM baffle.
8.
Connect the hard drive cables.
9.
Install the access panel (on page 13).
10.
Install the server blade
11.

Processor option

WARNING:
internal system components to cool before touching them.
CAUTION:
Do not touch the processor socket contacts.
•
Always install the processor socket cover after removing the processor from the socket.
•
Do not tilt or slide the processor when lowering the processor into the socket.
•
CAUTION:
Handle the processor only by the edges.
•
Do not touch the bottom of the processor, especially the contact area.
•
CAUTION:
heatsink is removed from the processor after it has been installed.
IMPORTANT:
function.
To install a processor:
Update the system ROM.
1.
("Installing a server
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To avoid damage to the system board:
To avoid damage to the processor:
The heatsink thermal interface media is not reusable and must be replaced if the
Processor socket 1 must be populated at all times or the server blade does not
blade" on page 17).
Hardware options installation 23