Mgbic-Lc05 Specifications (100Base-Fx; Mgbic-Lc07 Specifications (1000Base-Elx; Mgbic Lc04 Operating Range; Mgbic-Lc05 Optical Specifications - Enterasys G3G124-24 Hardware Installation Manual

Table A-15 MGBIC LC04 Operating Range
Item
9 or 10 µm SMF

MGBIC-LC05 Specifications (100BASE-FX)

Table A-16 MGBIC-LC05 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Link Power Budget
1. The maximum drive distance (up to 10 km) depends on the quality of the installed single-mode fiber-optic
cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment.
The Link Power Budget must not exceed those specified in this table.
Table A-17 MGBIC LC05 Operating Range
Item
9 or 10 µm SMF

MGBIC-LC07 Specifications (1000BASE-ELX)

Table A-18 MGBIC-LC07 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Maximum Input Power
Link Power Budget
(Full Duplex Only)
1. The maximum drive distance (up to 110 km) depends on the quality of the installed single-mode fiber-optic
cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment.
The Link Power Budget must not exceed those specified in this table. The MGBIC-LC07 input power must not
exceed -9 dBm. Otherwise, saturation could occur.
Table A-19 MGBIC-LC07 Operating Range
Item
9 or 10 µm SMF
1310 nm
N/A
10 µm SMF
-15 dBm
-25 dBm
1
10 dBm
1310 nm
N/A
-2 dBm, min.
-30 dBm, min.
-9 dBm
1
28 dB
1550 nm
N/A
1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications
Enterasys G-Series Hardware Installation Guide A-9
Range
2,000 Meters
Range
10,000 Meters
Range
110,000 Meters