Pump Belt
Replacing pump belt
Park the mower on a level surface. Engage the
parking brake.
Belt removal
1.
Remove the deck belt (see Deck Belt
Removal in this section of the manual).
2.
Create slack in the belt by removing the
spring on the pump idler arm.
3.
The belt should now be able to be removed
from the engine pulley and pump pulleys.
Belt installation
1.
Wrap the belt around the pulley
2.
Route the belt around the inside of the idler
pulley.
3.
Wrap the belt around the engine pulley.
4.
Reattach the spring on the pump idler arm.
5.
Reinstall the deck belt. (see Deck Belt
Removal in this section of the manual).
MAINTENANCE
1.
Electric clutch
2.
Idler spring
3.
Clutch stop
Pump belt removal
1
2
3
8054-002
43
Dixon-