Pump Belt - Dixon Kodiak SE 5225 KOH CE Operator's Manual

Pump Belt

Replacing pump belt
Park the mower on a level surface. Engage the
parking brake.
Belt removal
1. Remove the deck belt (see Deck Belt Removal in
this section of the manual).
2. Create slack in the belt by removing the spring on
the pump idler arm.
3. The belt should now be able to be removed from
the engine pulley and pump pulleys.
Belt installation
1. Wrap the belt around the pulley
2. Route the belt around the inside of the idler pulley.
3. Wrap the belt around the engine pulley.
4. Reattach the spring on the pump idler arm.
5. Reinstall the deck belt. (see Deck Belt Removal in
this section of the manual).
40
MaIntenanCe
1. Electric clutch
2. Idler spring
3. Clutch stop
Pump belt removal
1
2
3
8054-002