Handy Operations; Starting Playback From The Middle Of A Track (Manual Search); Playing At A Different Speed (Pitch) - Denon DN-C630 Operating Instructions Manual

ENGLISH
5

HANDY OPERATIONS

POWER
COMPACT DISC PLAYER
STOP CUE
PHONES LEVEL
MIN MAX
3
(1) Starting Playback from the Middle of a Track
(Manual Search)
• When a track is selected and the PLAY/PAUSE button is
pressed, playback starts from the beginning of that track.
To start from a different position in the track, use the
procedure described below to find the desired position.
Find the play position.
Press the SEARCH button.
SEARCH
1
Listen to the sound and find the desired play start position.
To check the play start position.
Press the PLAY/PAUSE button.
PLAY / PAUSE
2
Monitor the play signal to check the play start position.
Cue the play start position.
Press the CUE button.
CUE
3
The pickup returns to the play start position and the
standby mode is set.
14
2
DN-C630
OPEN / CLOSE TIME
0%
PLAY
TRACK END MON INDEX REPEAT A-B PITCH
MODE
PLAY / PAUSE
PROG.PLAY
SEARCH PROG. IN
ON / OFF
PRESET
1
Each press the SEARCH button
causes 1 frame to change. Each
frame is 1/75th of a second.
Continuing to press down on the
SEARCH button provides
automatic change of frames, the
speed of which increases while the
button is pressed.
Lit
PLAY / PAUSE
Playback start
Flashing Lit
CUE CUE
POWER
COMPACT DISC PLAYER
PHONES LEVEL STOP
MIN MAX

(2) Playing at a Different Speed (Pitch)

• Use this function to play discs at different speed.
• The speed can be changed within the range of –9.9 to
+9.9 %.
Set the variable speed mode.
Press the PITCH button.
PITCH
1
-1
an
1
-2 0%
Set the speed lock mode.
Press the PITCH button again.
PITCH
2
The play speed set with the pitch slider is held. In this
state, the play speed will not change even if the pitch
slider is moved.
When the playback speed is preset in the preset mode,
that play speed is set.
Press the PITCH button again to return to the normal
speed.
PITCH
3
NOTE:
When the play speed (PITCH) is set, the display shows the
set pitch, but the disc is played at the standard speed until
the PITCH button is pressed (and the LED is flash).
When the play speed is changed, the sampling frequency
of the digital output signal also changes, so it may not be
possible to receive digital signals.
DN-C630
OPEN / CLOSE TIME
0%
PLAY
END MON INDEX REPEAT A-B PITCH
TRACK MODE
CUE PLAY / PAUSE
PROG.PLAY
SEARCH PROG. IN
ON / OFF
PRESET
1 .2.3
-1
PITCH
Flashing
Play speed down
The play speed decreases
when the pitch slider is
moved upwards, increases
when the pitch slider is
moved downwards.
Play speed up
PITCH
Lit
PITCH
Off
1
-2