Dsp Bypass Control; Speaker Setup - Kenwood DNX9140 Instruction Manual

Setup Menu
DSP Bypass Control
Temporarily bypassing DSP (Digital Signal
Processor) System.
o
Display the Audio SETUP screen
Touch [G]
> [,...] >
[Audio SETUP]. (page
66)
II
Set the DSP Select
[Bypass] There is no effect by DSP.
[Through] There is an effect by DSP.
~
~
• When the mode is set
to
IBypass], DSP System cannot
be adjusted.
80
,~~
DNX9140/DDX814/DDX8034BT
Speaker Setup
You can select a speaker type and its size to get
the best sound effects.
o
Display the Speaker Select screen
Touch
[G]
> [,...] >
[Audio SETUP]
>
[Speaker Select]. (page 66)
II
Select a speaker you wish to adjust
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
IT] Center speaker
[1J
Front speaker
[]] Rear speaker
rn
Subwoofer
[Tweeter] You can set the tweeter when you
are selecting front speakers.
If you are using a tweeter together with the
front speakers, set the tweeter to "ON". In the
"ON" position, the Equalizer is adjusted to its
best position.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.