Source Control Screen - Kenwood DNX9140 Instruction Manual

TV Watching (DDX8034BT only)
Source Control Screen
Switches to source control screen to use various
functions.
o
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 14).
H
Operation on the Source Control Screen
[BAND] Switches to TV1 or TV2.
[I~], [~]
Select a channel.
Use the [SEEK] to change the channel tuning
sequence.
[List] Display the TV Preset List Screen. (page
38).
L~]
Switches to the TV screen.
[I]
Information display
Channel information display
"TV" Band display
"Preset" Memory Number Display
"ch"
Channel display
[ .. ] When • appears, the text display is
scrolled by touching it.
36tl~
DNX9140/DDX814/DDX8034BT
Multi Function
• ,.. Ridgeview
R~8_d
_ _ . 999
,T'"~r""AM[ ~ ~-
- - - - - - -
,.. Ridgeview RO.8_d__ 99999.99.
' - : - - P - \
~ ~
-p;-
~ f -P;;--
. "
~ ~ld~e~i~w '!o_8_d____
99999.99.
[1/2]
Switches the multi function display.
[.~]
Closes the multi function bar.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 37).
[SEEK]
Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display
~Se--,-tt--,-in~g_--,---.......,...,~--;",,-
_ _-,---_---,,---
"AUT01" Tunes in astation with good reception automatically
"AUT02" Tunes in stations in memory one after another
"MANU" Switches to the next frequency manually.
[PRE] Lists and selects memorized station.
[NAME]
Sets a name to the station. See <Set
Station Name> (page 38).
[Pl] - [P6] When [P 1] to [P6] buttons appear,
you can recall channels on memory.
For memory of broadcasting stations, see
<Auto Memory> (page 37) or <Manual
Memory> (page 37).