Dsp Bypass Control; Speaker Setup; [Audio Setup]; [Speaker Select] - Kenwood DDX7034BT Instruction Manual

Setup Menu

DSP Bypass Control

Temporarily bypassing DSP (Digital Signal
Processor) System.
1 Display the Audio SETUP screen
>
Touch [ ] [
63)
2 Set the DSP Select
[Bypass] There is no effect by DSP.
[Through] There is an effect by DSP.
⁄
• When the mode is set to [Bypass], DSP System cannot
be adjusted.

Speaker Setup

You can select a speaker type and its size to get
the best sound effects.
1 Display the Speaker Select screen
>
Touch [ ] [
[Speaker Select]. (page 63)
2 Select a speaker you wish to adjust
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
1 1 1
2 2 2
3 3 3
1 Front speaker
Rear speaker
2
Subwoofer
3
[Tweeter] You can set the tweeter when you
are selecting front speakers.
If you are using a tweeter together with the
76 DNX7140/DNX7000EX/DDX714/DDX7034BT
>
] [Audio SETUP]. (page
> >
]

[Audio SETUP]

front speakers, set the tweeter to "ON". In the
"ON" position, the Equalizer is adjusted to its
best position.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
3 Select a speaker type
You can select any of the following speaker
types.
"Front" OEM, 4 inch, 5 inch, 6-1/2 inch, 6-3/4
inch, 7 inch, 4x6, 5x7, 6x8, 6x9, 7x10
"Rear" NONE, OEM, 4 inch, 5 inch, 6-1/2 inch,
6-3/4 inch, 7 inch, 4x6, 5x7, 6x8, 6x9, 7x10
"Subwoofer" NONE, 6 1/2 inch, 8 inch, 10 inch,
12 inch, 15 inch over
⁄
• Select "NONE" if you have no speakers.
Crossover Network Setup
You can set a crossover frequency of speakers.
1 Select the speaker to set the crossover
1 1 1
2 2 2
3 3 3
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
2 Display the Crossover setup screen