Controlling Tone-Based Services; Setting Up The Hands-Free Phone - Kenwood DNX9140 Instruction Manual

Controlling Tone-based Services
Uses tone base service using DTMF (Dual Tone
Multi FrequE~ncy).
D
Display the Talking screen
See <Calling by Entering a Phone Number>
(page 53).
lEI
Display the DTMF input screen
D
You can send tOnE~S during a call
Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
D
Display the Hands-Free Control screen
See <Making a call> (page 52).
lEI
Display the Hands Free Setup screen
D
Set each item
[Auto Response] Sets an automatic response
time to pick-up an incoming call.
(i2J
"OFF")
"OFF": This function is disabled.
"0-99": Sets the incoming call ringing duration
(in seconds).
[Phone Voice] Sets the phone call voice /
ringing tone output position.
([2]
"Front All")
"Front L": Outputs the phone call voice from
the front left-hand side speaker.
"Front R": Outputs the phone call voice from
the front right-hand side speaker.
"Front All": Outputs the phone call voice from
both front speakers.
Nextpage~
English 55