Setting The Test Tone - Samsung HW-D600 User Manual

Setting the Test Tone

Use the test tone to check the speaker connection status or level.
1. Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
2. Press the ▲▼ buttons to select SPEAKER, and then press
the ENTER button.
3. Press the ▲▼ buttons to select TEST TONE, and then press
the ENTER button.
4.
Press the ▲▼ buttons to select the option you want, and then
press the ENTER button.
•
AUTO : Test signal will be automatically output as follows;
F.L CEN S.W
- During test tone output, press the ▲▼ buttons to adjust the
speaker output level from -10 to +10 dB by 1 step.
•
MANUAL : Enables you to adjust the output level of the
speaker manually.
1) Press the ENTER button to select the speaker
you want.
Each time you press the ENTER button, F.L
CEN S.W
selected in turn.
2) Press the ▲▼ buttons to set the Test Tone
mode you want.
You can adjust the speaker output level from -10
to +10dB by 1 step.
The sound gets quieter at -10dB and louder at
+10dB.
- Test Tone Output -
• F.L (front left) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB
• S L (surround left) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB
- To stop test tone -
•
Press the SETUP/MENU button once.
SETUP OFF appears on the display and test tone stops.
✎
NOTE

In the Dolby Pro Logic IIx mode, test signal will be automatically output as follows :
F.L CEN S.W

In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows :
F.L FHL CEN
F.R S.R S.L.
F.R S.R S.L will be
• CEN (center) : -10 ~ +10dB
• S.W (subwoofer) : -10 ~ +10dB
• SBL (surround back left) : -10 ~ +10dB
• SBR (surround back right) : -10 ~ +10dB
F.R S.R SBR SBL
S.W FHR F.R S.R
F L
▲
0 d B C
▼
0dB
SL
USER
0dB
> MOVE
SELECT
S.L.
S.L.
MANUAL
FR
SW 0dB
0dB
SR
0dB
' RETURN
EXIT
39