Connecting Using The External Amplifi Er - Samsung HW-D600 User Manual

By factory default, the AV receiver is designed as 5.1 CH surround sound system. However, it can be
extended to 7.1CH surround sound system in combination with a separate amplifi er and additional
speakers as shown below:
• Use an RCA audio cable to connect the AV receiver's SURROUND BACK OUT L/R jacks to an
analog audio input on your external amplifi er for SURROUND BACK or FRONT HEIGHT.
• Connect your SURROUND BACK Speakers or Front HEIGHT Speakers to the speaker terminals on
your external amplifi er.
• 7.1 channel settings using an external amplifi er.
AV RECEIVER
SL
SBL
L, R, C, SW, SL, SR, SBL, SBR ( Dolby Pro Logic IIx )
✎
NOTE

Surround Back Out only outputs analog signal.

AV Receiver's SURROUND BACK OUT provides the Volume Control.

The external amplifi er with volume control and without volume control can be used.

When you use the external amplifi er with volume control, external amplifi er's volume should be
adjusted to a suitable position.

The volume control for the 7.1 channel can be controlled in this AV receiver.
Connecting Using the External Amplifi er
6.6~9.8 feet (2~3m)
External
Amplifi er
SR
SBR
FHL
6.6~9.8 feet (2~3m)
External
AV RECEIVER
Amplifi er
SL
L, R, C, SW, SL, SR, FHL, FHR( Dolby Pro Logic IIz)
SBL
External Amplifi er
SURROUND BACK
FHR
SR
SBR
25