Audio Setup; Selecting A Source Device And Connection Jack (Digital Audio In); Setting The Speaker Size - Samsung HW-D600 User Manual

Setup

Selecting a Source Device And Connection Jack (Digital Audio In)

Select the external devices you have connected to the receiver.
1. Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches
between INPUT and SETUP OFF.
2. Press the ENTER button to select INPUT.
3. Press the ENTER button to select INPUT SELECTION.
4. Press the ▲▼ buttons to select a desired jack.
• Devices switch as follows; BD/DVD, SAT, CD
✎
NOTE

You can also use the SETUP, ,,., ENTER, RETURN
buttons on the front of your AV Receiver.

Setting the Speaker Size

Signal outputs and frequency response from the speaker will be adjusted according to your speaker
confi guration and whether certain speakers are used or not.
1. Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
2. Press the ▲▼ buttons to select SPEAKER, and then press
the ENTER button.
3. Press the ▲▼ buttons to select SPK SIZE, and then press the
ENTER button.
4.
Press the ▲▼ buttons to select the speaker you want, and
then press the ENTER button.
•
Each time you press the ▲▼ buttons, FRONT
CENTER SURR
SUBW CROVR will be selected in turn.
5.
Press the ▲▼ buttons to set the mode (LARGE,
SMALL etc.) for the selected speaker.
6.
Repeat steps 2-5 to set the mode for each speaker.
34

Audio Setup

SBACK(DPLIIx) / FRONTH(DPLIIz)
FRONT
CENTER
SURROUND
USER
SURROUND BACK
SUBWOOFER
CROSSOVER
> MOVE ' RETURN
SELECT
SPEAKER SIZE
LARGE : SMALL
SMALL : SMALL
: SMALL
: SMALL
: YES
: 100Hz
EXIT