Setup
Audio Sync
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio
delay time to match the video.
1.
Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches
between INPUT and SETUP OFF.
2.
Press the ▲▼ buttons to select OPTION, and then press the
ENTER button.
3.
Press the ▲▼ buttons to select AUDIO SYNC, and then
press the ENTER button.
4.
Press the ◄ ► buttons to set the AUDIO SYNC Delay Time.
•
You can adjust it from 0 to 240MS in 10MS steps.
Tone Control
This will enable you to adjust the bass and treble level.
1.
Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
2.
Press the ▲▼ buttons to select OPTION, and then press the
ENTER button.
3.
Press the ▲▼ buttons to select TONE CONTROL, and then
press the ENTER button.
4.
Press the ▲▼ buttons to select TONE, and then press the
ENTER button.
5.
Press the ▲▼ buttons to select ON or OFF you want, and then
press the ENTER button.
•
If it is set to TONE OFF, the Tone Control function will be
disabled.
6.
Press the ▲▼ buttons to set the Tone Control mode you want.
•
BASS & TREBLE : Press the ◄ ► buttons to set from -6 to 6.
•
Each time you press this button, TONE
•
You can adjust it from -6 to +6dB by 1 step.
•
The sound gets quieter at -6dB and louder at +6dB.
✎
NOTE
The Tone Control function can be applied to the front channels only.
42
Other Settings
BASS
TREBLE will be selected in turn.