Table of Contents
Advertisement
Setup
Selecting a Source Device And Connection Jack (Digital Audio In)
Select the external devices you have connected to the receiver.
1.
Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches
between INPUT and SETUP OFF.
2.
Press the ENTER button to select INPUT.
3.
Press the ENTER button to select INPUT SELECTION.
4.
Press the ▲▼ buttons to select a desired jack.
•
Devices switch as follows; BD/DVD, SAT, CD
✎
NOTE
You can also use the SETUP, ,,., ENTER, RETURN
buttons on the front of your AV Receiver.
Setting the Speaker Size
Signal outputs and frequency response from the speaker will be adjusted according to your speaker
confi guration and whether certain speakers are used or not.
1.
Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
2.
Press the ▲▼ buttons to select SPEAKER, and then press
the ENTER button.
3.
Press the ▲▼ buttons to select SPK SIZE, and then press the
ENTER button.
4.
Press the ▲▼ buttons to select the speaker you want, and
then press the ENTER button.
•
Each time you press the ▲▼ buttons, FRONT
CENTER SURR SBACK(DPLIIx) / FRONTH(DPLIIz)
SUBW CROVR will be selected in turn.
5.
Press the ▲▼ buttons to set the mode (LARGE,
SMALL etc.) for the selected speaker.
6.
Repeat steps 2-5 to set the mode for each speaker.
32
English
HW-D600_D650S_ELS_0603.indd 32
HW-D600_D650S_ELS_0603.indd 32
Audio Setup
USER
> MOVE
SPEAKER SIZE
FRONT
:
SMALL
LARGE
CENTER
SMALL
:
SMALL
SURROUND
:
SMALL
SURROUND BACK
:
SMALL
SUBWOOFER
:
YES
CROSSOVER
:
100Hz
' RETURN
SELECT
EXIT
2011-06-03
2011-06-03
12:40:29
12:40:29
Advertisement
Table of Contents
