Configuration Backup & Restore - D-Link EasySmart DES-1100-16 Manual

Click Browse to browse your inventories for a saved firmware file. And then click Upgrade to restore the
selected firmware file.
Configuration Backup & Restore
Allow the current configuration settings to be saved to a file (not including the password), and if necessary,
you can restore configuration settings from the file.
Backup or restore the configuration file to or from your local drive.
Click Backup to save the current settings to your disk.
Click Browse to browse your inventories for a saved backup settings file.
Click Restore after selecting the backup settings file you want to restore.
Figure 32 – Tool Menu > Firmware upgrade
CAUTION: Do not disconnect the PC or remove
the power cord from device until upgrade is
complete. The Switch may crash if the Firmware
Upgrade is incomplete.
Figure 33 – Tool Menu > Configure Backup and Restore
Note: Switch will reboot after restore and
all current configurations will be lost
20
D-Link Web Smart Switch User Manual