• Do not stack components directly on top of each other. • Allow adequate ventilation when placing your compo- nents in a stand. • Place the receiver near the top shelf of the stand so heated air rising from it will not affect other components. Disc you can play While advances have been made to ensure that your player 10cm/4”...
S-video S-video provides a better connection for the video portion of the signal than composite video (yellow color terminal). When connecting S-video cable, a Composite video cable (yellow RCA connector) must also be used. Progressive scan You can enable the progressive scan function through the main menu only if the following requirments are fulfilled: 1.
Speaker Polarity When connecting the speakers, make sure the polarities (“+” speaker wire to “+” on the receiver) of speaker wires and terminals are matched. If the cords are reversed, the sound will be distorted and lack bass (“out of phase”...
Subwoofer = STRONG details. Restore to default settings When the receiver is on and the disc tray is opened, press SUBWOOFER for 5 seconds until the screen goes black, then the initial language selection menu will appear. All system settings will be restored to default, the parental password will also be reset.
UP/DOWN to adjust level setting. 20. TV • Press to select the television. Functions in TV mode (available when using a RCA TV) 3. CH+, CH- • Press to change channel. 7. LEFT / RIGHT • Press to use the zoom function (with a 16:9 television only) 9.
You will be able to have the signal from the MD player. STANDBY/ON • When the receiver is on, press ON/OFF on the remote or STANDBY/ON on the receiver to return to the standby mode. When you turn up the unit for the first time: 1.
Source button Corresponding connector Tuner section) (remote control) (receiver back panel) 2. The receiver is also equipped with DVD/CD player. Press - DVD/CD built-in the SOURCE button on the main unit or DVD/CD button on - TUNER built-in the remote to activate the feature.
Stereo Dolby PL II MOVIE Dolby PL II MUSIC Dolby Stereo Default Settings The receiver will keep the last selection in memory as long as it doesn’t enter standby mode. SOURCE DEFAULT INPUT (as seen on display) AUX 1 Analog...
Advanced Sound Control Speaker Icons It is important to note, however, that not all Dolby Digital The receiver shows the speakers’ settings on the display sources are encoded with the full complement of five chan- with the following icons: nels plus subwoofer. Speaker icons show how many and which speaker you have enabled (See “Fine Setting of the...
RTD160-EN DVD 5/13/04 10:40 AM Page 1 Basic Playback Features • Press STOP once to stop playback and go into resume mode. 1. To select the DVD/CD input source, press SOURCE on the main unit until "DVD/CD" appears on the display. You may also directly press DVD/CD on the remote.
RTD160-EN DVD 5/13/04 10:40 AM Page 2 DVD Player Slow motion playback On-screen banner display 1. Press PLAY/PAUSE on the main unit or PAUSE on the You can access the on-screen banner display during play- remote control to freeze the picture during playback.
Page 14
RTD160-EN DVD 5/13/04 10:40 AM Page 4 DVD Player Selecting an camera angle Using bookmarks 1. Open the camera angle menu, or press ANGLE on the The bookmark feature allows you to mark a point on the remote. disc for quick access. You can store up to 12 bookmarks.
RTD160-EN DVD 5/13/04 10:40 AM Page 6 DVD Player Insert items to the playlist Delete items on the playlist 1. Select the program menu from the OSD banner to dis- 1. Select the program menu from the OSD banner to dis- play the program edit playlist.
Page 16
RTD160-EN DVD 5/13/04 10:40 AM Page 8 DVD Player 2. Use UP/DOWN to select the language and then press OK Subtitle language to return to the main menu. This step will define the default subtitle language. Choosing a subtitle language from the on-screen banner display will only overwrite this setting temporarily.
Page 17
RTD160-EN DVD 5/13/04 10:40 AM Page 10 DVD Player Clear password Important: 1. Open the Parental Control menu Keep the password in a safe place or remember it reliably as access to rated 2. Use the number buttons to enter the password.
RTD160-EN CD_MP3 5/13/04 10:39 AM Page 2 CD / mp3 Player Loading and playing an audio CD mp3 recommendations 1. Press OPEN/CLOSE on the front panel to open the disc tray. Place the disc on the disc tray with the label side •...
RTD160-EN CD_MP3 5/13/04 10:39 AM Page 4 CD / mp3 Player On- screen banner display for CD playback Selecting a track 1. Refer to “General use” to open the track menu. Track Bookmark Time indicator Sleep Playmodes 2. Enter a track number. Start any single-digit track num- ber by a 0 (e.g.
RTD160-EN CD_MP3 5/13/04 10:39 AM Page 6 CD Player Program playback Cancel program Edit program Program will be cancelled when; 1. the disc tray is opened; 2. power is turned off. 1. In STOP mode, enter the OSD banner to display the edit...
RTD160-EN CD_MP3 5/13/04 10:39 AM Page 8 mp3 Player Cancel program Program playback Program will be cancelled when; Edit program 1. the disc tray is opened; 2. power is turned off. 1. In STOP mode, enter the OSD banner to display the edit...
RTD160-EN JPEG 5/13/04 10:38 AM On- screen display for JPEG CD File mode 1. In the JPEG mode window, use UP/DOWN to select a directory, and the OK button on the remote to enter differ- ent directories. You can use the LEFT button to go up one layer in the directory.
Radio Operating the Radio Storing radio stations: The receiver has a built-in tuner that allows for FM radio The receiver can store up to 40 radio stations in memory. function. You can enter every single radio station yourself or the receiver can store all available radio stations automatically in an ascending order.
• Wipe the disc clean. Noise interference appears on the TV, while watching a • Use a RCA lens cleaner. TV program and the DVD player is left on ? • The disc's region no. differs from your player's region No.
INCREASE THE SCOPE OF THIS WARRANTY. What we will do: • REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS • Pay any Authorized RCA Audio Service Center the labor WARRANTY IS THE EXCLUSIVE REMEDY OF THE CON- charges to repair your unit.
Page 26
CONSUMER. THOMSON MULTIMEDIA LTD. SHALL NOT What we will do: BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAM- • Pay any Authorized RCA Audio Service Center the labor AGES RESULTING FROM THE USE OF THIS PRODUCT. charges to repair your unit.