Canon CHDK Quick Start Manual page 48

46
The size of the 1st partition is fixed to 2MB in the code (not changeable in the CHDK menu),
but you can change it there and compile your own build, if you know how, using
Shell, http://drop.io/gcc_for_chdkshell
Normally the creation of a partition deletes all data on the card, the swap command should not
delete any data, but you should test this first!
The partitions can also be created manually with a card reader on a computer, the 1st partition
must be less than 4GB and formatted with FAT16. Note: as the CHDK download files grow in
size with later versions it may be necessary to partition with a computer anyway - to make the
1st partition larger than 2MB to accommodate the larger file size.
To prepare SD cards, and make them bootable for auto starting of CHDK,
SDMInst for Mac OS. For installation information and instructions, see the
supplement to this User Guide :
• ALT +/- debug action
Action for the +/- key (on
[Dmp RAM] -> a complete memory (RAM) dump will be written to the SD card
[Page] in this mode the page shown in the propcase viewer can be changed (double-press
changes the paging direction (up/down))
• Show saving time
Remote parameters
See Page 36
DNG visible via USB
This feature enables the display of DNG files on your computer, via USB connection.
the applications Cardtricks, or SDMInst.exe, are used on Windows OS, and
http://drop.io/chdk_new_UserGuide_booklet_pdf
< Debug parameters < Miscellaneous Stuff < Main Menu
series
IXUS
< Debug parameters < Miscellaneous Stuff
< Miscellaneous stuff < Main Menu
Enable [•] / Disable [ ]
CHDK Installation Guide
is used instead)values are [None],
DISP
whim's CHDK
or -