Zebra Parameters - Canon CHDK Quick Start Manual

24
Show Histo Ev Grid
Adds 4 or 5 vertical lines to the histogram dividing the histogram by full stops.

Zebra parameters

Zebra is a feature that indicates over and under
exposed areas of the scene. When the shutter is half-
pressed, the areas of the scene that are under or over
exposed will turn red. The zebra effect can also be
applied to existing images by half-pressing the shutter
during playback mode.
Draw Zebra
Enables the drawing of over/under exposure indicators.
Zebra mode
Determines how the over/under exposed areas will be indicated.
• Blink 1 – Solid coverage, blinks every ½ second.
• Blink 2 – Solid coverage, blinks every second.
• Blink 3 – Solid coverage, blinks every two seconds.
• Solid – Solid coverage, no blinking.
• Zebra 1 – Striped coverage, thin diagonal lines.
• Zebra 2 – Striped coverage, thick diagonal lines.
Enable [•] / Disable [ ]
< Main Menu
•
Enable [ ] / Disable [ ]
[Blink 1, Blink 2, Blink 3, Solid, Zebra 1, Zebra 2]
Zebra Solid
< Histogram parameters < Main Menu
EV Grid Enabled
Zebra 1 Zebra 2