Draw Palette - Canon CHDK Quick Start Manual

<ALT> Mode button
Cameras with a shortcut button can assign from a number of buttons to use as the
button, choose from
Display
Disable LCD Off
: LCD disabled,
No
mode. For long intervals you should disable the Power Saving options of your camera.
<ALT>
This can be done in the
LCD Off value to Script
is running.

Draw palette

Allows inspection of colours and transparencies by (almost) full screen. Use the numbers of
the desired colours to select them in Visual Settings menu. Use arrows to navigate palette,
press
Func./Set
Show build info
Displays the current version of CHDK in use, ie: 0.9.9 - 910, date May 07 2010.
Show memory info
Displays free RAM available, also CHDK size and load address.
Make card bootable...
Option to enable auto load of CHDK at startup. Memory cards must have FAT12 or FAT16
format for the bootable partition. Large cards formatted in camera will be FAT32.
Swap partitions
For cameras with multi partition support. To access each partition on a multi partition
memory card, (in computer OS's that only read one partition) Press
currently inactive partition.
Reset options to default...
Reset all functions and displays back to CHDK default values.
Note:-
By this operation you will lose all your personal settings.
Debug Parameters
In this menu internal data on the functioning of CHDK is available.
•
Debug data display
Shows debug data on the OSD, values are: [None, Props, Params, Tasks]
Show
http://chdk.wikia.com/wiki/PropertyCase
The values are generally shown unsigned - that's because the propcase viewer doesn't
know whether a value is supposed to be signed or unsigned, and treats everything as
unsigned. "65152" is just the same value as "-384" when considered as an unsigned
short rather than a signed short.
Shows the task list, only on VxWorks cameras.
PRINT, SHORTCUT, FLASH, TIMER, ISO
button on A570, A590, A720,
[
No, Alt
: LCD on,
Alt
<ALT>
,
so the display won't turn off while in
to select a color, press
< Miscellaneous Stuff < Main Menu
< Debug parameters < Miscellaneous Stuff
button on SX100,
Face
, ]
Script,
: LCD on during script execution.
Script
menu. In the Miscellaneous Stuff menu item set the Disable
to exit.
MENU
Also see:- Page 45 "Create card with two partitions"
variables
<ALT>
, or buttons.
VIDEO
button on A650,
ISO
mode or while a script
<ALT>
to change to the
SET
43