Delay Start; Programme Knob; Auto Dry; Extra Rinse - AEG L 99695 HWD User Manual

18 www.aeg.com
to decrease the energy consumption
when:
• You do not use the appliance for 5
minutes before you pressStart/Pause
button.
All setting are cancelled.
Press the button On/Off to activate
the appliance again.
Set again the washing programme
and all possible functions.
• After 5 minutes from the end of the
washing programme
Refer to 'At the end of the
programme'

8.3 Programme knob

Turn this knob to set a programme. The
related programme indicator comes on.

8.4 Auto Dry

Touch this button to set one of 3
automatic dryness levels proposed by
the appliance. On the control panel the
dryness indicators illuminate accordingly.
The text bar in the display shows the set
`dryness level:
• Iron dry – 1 indicator on: laundry to
be ironed
• Cupboard dry – 2 indicators on:
laundry to be put in store
• Extra dry – 3 indicators on: laundry to
be fully dried
8.5 Time Dry
Touch this button to set the time that
suits the fabrics you have to dry. The text
bar in the display shows the set value.
Each time you touch this button the time
value increases by 5 minutes.
8.6 Steam
Touch this button to set the steam level.
This is possible only with programmes
You can not set all
automatic levels for each
type of fabrics.
You cannot set all time
values for different types of
fabrics.
where the steam function is available.
The duration of the steam phase
changes accordingly to your selection.
8.7 Start/Pause
Touch button Start/Pause to start or
interrupt a programme.

8.8 Delay Start

Touch button Delay Start to delay the
start of a programme from 30 minutes to
20 hours.
8.9 Time Save
Touch button Time Save to decrease the
programme time.
You can select:
• SHORTENED DURATION: to wash
items with daily soil.
• EXTRA QUICK: to wash quickly items
with almost no soil.
Some programmes accept
only one of these functions.

8.10 Extra Rinse

Touch this button to add rinsing phases
to a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
8.11 Stains/Prewash
Touch this button to set one of the
following functions:
• Prewash
Use this function for heavy soil. The
appliance adds a prewash phase to
the main wash. The programme
duration increases.
Soak
•
Use this function for heavy soil. The
appliance soaks the laundry at 30°C
for about half an hour before to wash.
• Stains
Use this function for laundry with hard
stains to remove. When you set this
function, put the stain remover into
compartment .