AEG L 99695 HWD User Manual page 10

10 www.aeg.com
Digit area
Time of the day
When you activate the appliance the display shows the time of the day for some
seconds. To adjust the clock, refer to "Clock setting".
Programme duration
When you set the programme, the cycle duration is displayed for a few seconds
then, the time of the programme end appears again.
D
End time of the programme
Time of delay
When you set the delayed start the time of the programme end increases by steps
of 30 minutes till 10 hours and by steps of one hour till 20 hours.
End of the programme
The display shows a zero.
This part comes on only if the door is open - Refer to 'Activating the appliance and
setting a programme'.
E
Graphic bars
To set a function:
The function indicator comes on when the related function is set.
Programme duration indicator
The indicator comes on when the digits shows the programme dura-
tion.
Programme end indicator
The indicator comes on when the digits shows the programme end
time.
Maximum allowed load of laundry for the set programme (in kg).
The empty indicator bar appears only if the related function is avail-
able for the set programme.
If an indicator bar does not come on, it means that it is not available.
The indicator bar fills accordingly to the set functions.
If you make a wrong selection, the text bar says that the selection is not
possible.