Key Functions - Radio Shack 8-in-One Remote User Manual

U ' G
SER S UIDE
K F
EY UNCTIONS
The red LED (Light Emitting Diode) blinks to show that
the remote control is sending signals.
The LCD (Liquid Crystal Display) has 15 alphanumeric
characters that display status messages during remote
control operation and programming.Also, one or more
icons will appear in the LCD to indicate the following
conditions:
Morning or Afternoon Time
Low Battery
IR Signal Transmission
Use P for all programming sequences.
Use to turn on or off the key backlight.When this feature
is activated, keys will remain backlit for 5 seconds after the
last key press. In the setup mode, backlighting will remain
on for 30 seconds.
Press POWER once to turn on or off the selected device.
Press VCR, CBL, SAT, TV, CD, AUX, DVD, or AUDIO once to
select a device to control.
After programming, press MY SYSTEM once to select your
custom system controls. See Using My System on page 30.
Use GUIDE to display the program, guide, or setup menu
for the selected device.
In the VCR, CBL, SAT, and TV modes, use SCAN (FAV) to scan
favorite channels and/or all channels. See Programming
Favorite Channel Scan on page 28 and Using Channel Scan
on page 29.
Press EXIT once to exit the selected device's program, guide,
or menu.
During programming, press EXIT once to exit the
program mode.
Also see the Key Table on pages 10 and 11 to learn how
EXIT functions when using other devices.
Use INFO to display the current channel and program
information.
continued on next page...
A Quick Look At The Controls 7