Using Macros; Programminga Favorite Channel - Radio Shack 8-in-One Remote User Manual

8-
CHANGING VOLUME LOCK
P V U
ROGRAMMING OLUME
4. (Optional) Press
or
a. Press SELECT once. [SEL MODE] appears.
b. Press a mode key once (e.g., TV) to unlock it. [UNLOCKED] and then
[SEL MODE] appear.
c. If desired, repeat step 4b as needed to unlock volume controls for
other devices. Otherwise, press EXIT to exit the programming mode.
[EXIT SETUP] appears as the remote returns to normal operation.

USING MACROS

With Macro programming, your remote can be setup to perform repetitive, time-consuming
operations for easy, convenient access through the press of a single key. Macros are ideal for
home theater operations, setting a favorite channel, guide steps, or other multiple functions
you would like to control with one key press. Moreover, each macro can hold up to 15 key
presses total.
NOTE: Programming a new macro over an existing one will erase the original macro.
P A F
ROGRAMMING AVORITE
With so many channels available through your cable or satellite system provider, you can
program a macro that directly selects a favorite channel with one key press. For example,
let's assume your favorite cable programs are on channel 71. Perform the following steps to
program a macro for direct access of this channel:
NOTE: This example assumes the TV connects directly to the cable and not through a cable converter.
1. On the remote, press and hold P until the display changes from the default
device and time to [CODE SET].
NOTE: Default values for device, its code, and time are shown above.Your remote control
settings may be different.
NOTE: If you wish to exit the programming mode at any time, press EXIT once. An
[EXIT] message appears as the remote control returns to normal operation.
NOTE: If an [INVALID] message appears, you have inadvertently pressed an incorrect
key. Simply note your error and continue programming.
24 Using Macros
-O R
IN NE EMOTE
( )
NLOCK CONTINUED
▲ ▼
) once. [ONE MODE] appears.
(or
C
HANNEL