Hardware Description - LevelOne WCS-6020 User Manual

WCS-6020 / WCS-6050 User Manual

Hardware Description

1. Light Sensor
Automatically detects lighting condition to turn IR LEDs on/off.
2. Infrared LEDs
There are twelve Infrared (IR) LEDs in front of camera for night vision
purpose. The IR LEDs will auto or manual turn on when the camera is in the
dark environment.
3. Built-in Microphone
The camera has a built-in internal microphone. This microphone is hidden in
the pinhole located on the head of camera.
4. Front LEDs
Red LED indicates power, red LED will turn on always after plug-in power.
Green LED indicates networking, green LED will blink every second after
getting IP address.
Upon powering up, two of front LEDs will become lighted then the camera will
do self-rotation. During the self-rotation, red LED will be on and the network
camera is standing by for getting an IP address.
5. Ethernet Port
Beside the DC power Jack, the LAN socket is an RJ-45 connector for
connections to 10Base-T or 100Base-TX Fast Ethernet cabling. Please use a
Cat 5 "straight through" cable to connect the Network Camera to an Ethernet
network switch or hub.
5/54