Video Record - LevelOne WCS-6020 User Manual

Network Camera User's Manual

Video record

Schedule mode
(1) Every day: Enable/Disable every day application.
(2) Week day: Enable/Disable week day application.
(3) Selected day: Enable/Disable selected day application.
Schedule information
(1) Enter the Start time and Stop time for day mode.
Note that the time format is [hh:mm] and is expressed in 24-hour clock time.
By default, the start and end time of day mode are set to 01:00:00 and
23:59:59.
(2) Sun/Mon/Tue/Wed/Thu/Fri/Sat: Select the days of the week to perform the
application.
(3) Start day and Start time as the start timing the time. End day and End
time as the end day the time.
(4) Enable cyclic recording: The cyclic recording function is enabled, during
34/54