Horizon Fitness T10K User Manual page 21

WI RE LE SS P ED O M E T E R I NS T R U C T I O NS
POSITIONING PEDOMETER
Attach the pedometer to your belt, skirt, waistline, etc, with the clip located on
the back of the pedometer. Do NOT place the pedometer in line with the center
of your body. Instead position the pedometer to the left or right of the center
of your body to ensure proper step count during your workout. Be sure to
attach the pedometer horizontally and securely enough that it will not become
dislodged during workout.
T O COUNT Y O U R S T E P S
POWER ON/DISPLAY STEP COUNT:
• Press .
• Displays step count accumulated since the unit was last reset.
DISPLAY ACCUMULATED TIME
• Press again.
• Displays time accumulated since the unit was last reset.
• Shown as hours-minutes
RETURN TO STEP COUNT
• The display will automatically return to step count after 5 seconds.
RESET STEP COUNT AND ACCUMULATED TIME
• Hold for 2 seconds.
T O TRA NSM IT Y O U R S T E P S
TRANSMIT STEP COUNT
• Hold for 2 seconds.
• The display will read, "Send" while the transmission takes place.
• The step count will automatically update during the workout.
• The program will end when the step count goal is reached.
NOTE: Transmission can take up to 15 seconds.
The pedometer may transmit in either step count mode or accumulated time mode.
��
�����
20