Table of Contents
Advertisement
TABM Software
Installation
Version 4.0 of the Transcend AccessBuilder Manager application is
provided on CD-ROM. An extraction utility is provided to automatically
install the TABM software from the CD-ROM to your local hard drive, a
network server hard drive, or onto two diskettes.
Once installed, TABM is then used to configure your AccessBuilder
remote access servers. For convenience, basic configuration
information can be collected using the Configuration Worksheets
provided in Appendix D.
The following functional key conventions are used within TABM:
Key Label
Function
Apply
Apply changes made to the AccessBuilder, but leaves the dialog
box open.
Change
Store the changes made locally without sending them to the
AccessBuilder.
The following procedure assumes installation from diskettes. If you are
installing from CD-ROM, refer to the instructions in the CD-ROM insert.
1 Start Microsoft Windows, and open the Program Manager window.
2 Insert the diskette labelled "Transcend AccessBuilder Manager for
Windows, Diskette 1" into a diskette drive on the Windows
workstation.
3 From the File menu, choose Run [Alt] + [F] + [R].
4 In the Run dialog box edit box type A:\SETUP and choose OK to invoke
the installation utility.
If you used a diskette drive other than drive A, use that drive's
designator instead of A: before the SETUP command (for example,
B:\SETUP).
5 The AccessBuilder Manager Setup dialog box appears with a message
indicating initialization is occurring. After the initialization process has
finished, the Welcome dialog box appears. Choose the Continue
button to proceed with installation.
TABM Software Installation
3-3
Advertisement
Table of Contents
