Table of Contents
Advertisement
Starting the TABM
Application
Double-click any asynchronous port in the graphical image to
configure asynchronous port parameters for that port. Use the
Configuration menu to access other configuration dialog boxes for the
displayed server.
The single server port status update process is automatically repeated
at an interval of n seconds, where n can be set to any value from 0 to
120 (the default time is 16 seconds).
@ Symbol
Throughout TABM's dialog boxes, the @ symbol is used to indicate that
the respective parameter or group requires the AccessBuilder be reboot
in order for the new values to take effect.
The first time you start the TABM application, follow these steps:
If the host table of your TCP/IP stack contains the IP address of the
system running the TABM software, TABM program will use that IP
address. If the IP address is not available, the TABM program will ask
you to supply the IP address of the management system the first time
you run the TABM application (see step 2, below) and will save the IP
address for use thereafter.
1 From the Transcend AccessBuilder Manager program group,
double-click on the TABM icon:
2 The Transcend AccessBuilder Manager Login box then appears asking
for a password. Enter the factory default password: admin.
IP Only) If the IP address of the system running the TABM tool is not
available in the TCP/IP host table, a dialog box appears in which you
are requested to enter the management system's IP address. Type in
the IP address in dot-delimited form (that is, separating each group of
numbers with period characters, i.e., 129.147.72.20). Then choose the
OK button.
Starting the TABM Application
3-13
Advertisement
Table of Contents
