Horizon Fitness EX-67 User Manual page 7

ASS E MB LY ST EP 6
UPPER HANDLEBAR
ED BOLTS AND WASHERS
E MAST
DLEBAR
NOTE: There is NO hardware bag for this step.
A) Remove PRE-ATTACHED SET SCREWS from right UPPER HANDLEBAR.
B) Slide right UPPER HANDLEBAR onto LOWER HANDLEBAR and secure by reinserting PRE-ATTACHED SET
SCREWS
C) Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS.
Note the position of the snap tabs on the covers before snapping into position.
D) Repeat on other side.
12
EX-67_Rev.1.6.indd 12-13
UPPER HANDLEBAR
PRE-ATTACHED SCREWS
ASSEMBLY STEP 7
HANDLEBAR COVERS
A) Open HARDWARE BAG FOR STEP 7.
B) Attach the OUTSIDE ELBOW COVER to the ELBOW JOINT using 1 SCREW (Q).
C) Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER.
Note the position of the snap tabs before snapping into position.
D) Attach the INSIDE ELBOW COVER to the ELBOW JOINT using 1 SCREW (Q).
E) Repeat on other side.
HARDWARE BAG FOR STEP 7 CONTENTS :
SCREWS (Q)
ELBOW JOINT
INSIDE ELBOW COVER
OUTSIDE ELBOW COVER
SCREW (Q)
15 mm
Qty: 4
1
7/7/08 4:29:22 PM