Horizon Fitness EX-67 User Manual page 4

SPEAKERS
FAN
GRIP PULSE
CONSOLE MAST
TOP CAP
PIVOTING FOOT PAD
GUIDE RAIL CAPS
TOOLS INCLUDED
5mm L Wrench
c
5mm T Wrench
c
Phillips Screw Driver
c
13/17mm Flat Wrench
c
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
6
EX-67_Rev.1.6.indd 6-7
UPPER HANDLEBAR
HANDLEBAR COVER SET
CONSOLE MAST BOOT
LOWER HANDLEBAR
CUSTOMSTRIDE ™ ADJUSTMENT KNOB
PEDAL ARM COVER
ELBOW COVER SET
ROLLER WHEEL COVER
PARTS INCLUDED
c 1 Console c 1 Console Mast Boot
c 1 Console Mast c 1 Top Cap
c 2 Upper Handlebars c 2 Roller Wheel Covers
c 2 Lower Handlebars c 5 Hardware Bags
c 2 Lower Link/Pedal Arms c 1 Power Supply
c 2 Pedal Arm Covers c 1 Audio Adaptor Cable
c 2 Pivoting Foot Pads
c 2 Elbow Covers Sets
c 2 Handlebar Cover Sets
c 2 Guide Rail Caps
ASSEMBLY STEP 1
CONSOLE
MAIN FRAME
CONSOLE MAST
LOWER LINK ARM
PEDAL ARM
CONSOLE MAST BOOT
A) Open HARDWARE BAG FOR STEP 1.
B) Slide the CONSOLE MAST BOOT followed by the TOP CAP over the CONSOLE MAST.
C) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
D) Attach the sides of the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4
FLAT WASHERS (C).
E) Attach the front of the CONSOLE MAST to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2
ARC WASHERS (D).
F) Slide CONSOLE MAST BOOT down to seal the console mast hole.
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A)
15 mm
Qty: 6
ARC WASHER (D) ARC WASHER (D)
FLAT WASHER (C)
CONSOLE MAST
CONSOLE WIRE CONSOLE WIRE
CONSOLE MAST BOOT
TOP CAP TOP CAP
SPRING WASHER (B) FLAT WASHER (C)
Qty: 6 20 mm
Qty: 4
FLAT WASHER (C)
SPRING WASHER (B) SPRING WASHER (B)
BOLT (A) BOLT (A)
MAIN FRAME MAIN FRAME
ARC WASHER (D)
17 mm
Qty: 2
angle view
7
7/7/08 4:29:10 PM