Eclipse AVN726E Quick Start Manual page 8

Screen Operations after Turning
Power ON
When the engine is turned ON, the DVD/audio
power will automatically turn ON and the
Caution screen will appear. After the selection
of the language, touch [I Agree] to switch to the
Navigation screen. The power will turn OFF
when turning off the engine.
8ATTENTION
• Press [NAVI] if the navigation screen does not
appear.
• Press [MENU] and then touch [AUDIO OFF] if the
audio or DVD does not turn ON.
Setting the Navigation Operation
Mode
The main unit provides a choice of operation
modes ("Simple mode" and "Advanced mode"),
each providing different menus and settings.
The navigation operations and map-screen
layout are the same in each mode. This
document describes the basic navigation
operations available from "Simple mode." See
the ECLIPSE web manual for advanced
navigation operations ("Advanced mode").
When the power of the main unit is turned on for
the first time, the screen switches in the order
shown below.
• "Simple mode" or "Advanced mode" can be
switched later.
• The features and settings available in each
mode are as follows:
CD
Available in Simple mode
®
Available in Advanced mode
Type of action
CD ®
Navigating to a selected map point Yes Yes
Navigating to a street address Yes Yes
Navigating to an
incomplete
Yes Yes
address
Navigating to an intersection
Yes Yes
Navigating to recent destinations
Yes Yes
(History)
Navigating to Favorites Yes
Yes
Navigating to a POI Yes Yes
Navigating to coordinates
No Yes
Creating a multi-point route No Yes
Saving a map point as a Favorite
Yes Yes
destination
Saving a map point as a POI No Yes
Saving a map point as a location of
No Yes
a Road Safety Camera
Mark a map point with a Pin No Yes
Saving the active route
No Yes
Saving Track Logs No
Yes
Map Screen settings No Yes
Menu settings
Yes'1
Yes
Sound settings
Yes'2 Yes
Route Planning options Yes Yes
Regional settings Yes'3 Yes
Warnings No Yes
*1: Only background picture
*2: Only Master volume
*3: Only language selection