Hoover Wind Tunnel Operating Instructions Manual page 3

5
Place nuts in recessed areas
5
on front of handle. Hold each
nut in place while tightening each
bolt securely with a Phillips screw
driver.
STEP III Attach Hose
7
A
B
Align end of hose with projec-
7
tions (A) over slots (B) in dirt
duct.
STEP IV Position Tools
1 0
Place smaller unridged end of
1 0
wand into bottom of rack. Snap
wand into clip. Repeat with other
w a n d .
6
Reposition bag door by fitting
6
tabs on bottom of door into
opening. Press top of door to snap
securely shut.
NOTE: HOSE MUST BE CONNECTED AS SHOWN
FOR ALL OPERATIONS
8
B
Slide hose into (B) and twist
8
hose to lock it into place.
1 1
C
B
A
Snap ends of dusting brush (A)
1 1
crevice tool (B) and furniture
nozzle (C) into clips as shown.
9
C
Lift hose tube cover (C).
9
Position hose over hose hook
(D) and onto hose tube (E).
D
E
3